描述
重型太阳齿轮
Sun gears for high-torque planetary reducers and industrial transmissions where tooth-root strength, surface durability and load sharing are central.
Specify the sun gear as part of a planetary mesh
Heavy-duty selection begins with the complete planetary stage rather than outside diameter alone. Torque, speed, duty cycle, reversals, number of planet gears, load-sharing strategy, lubrication and expected service life all affect the sun gear. The gear must also remain compatible with the mating planet and ring geometry.
For quotation, the most reliable input is the released drawing plus mating-gear data. If the design is still open, provide the required ratio, torque, speed, duty cycle, package envelope and interface constraints so the unresolved items can be identified before manufacturing.
Information used to define the ordered part
Sun gears are not interchangeable simply because two parts have a similar diameter. The tooth system and the rotating interface must match the planetary stage.
| Component | Spur or helical power-transmission sun gear |
|---|---|
| Primary interface | Heavy spline, keyed bore or integrated shaft by drawing |
| 牙齿系统 | Metric module or diametral pitch (DP) as defined by drawing |
| 压力角 | Drawing-controlled; do not assume from outside diameter alone |
| Tooth count | Required for quotation and mesh verification |
| Gear quality | ISO, DIN, AGMA, JIS or customer-specific requirement can be reviewed as stated on the drawing |
| Materials | Alloy and carbon gear steels selected to drawing; examples used in industrial gear work include 20CrMo, 16MnCr5, 18CrNiMo7-6, 8620-type and 42CrMo families |
| 热处理 | Carburizing, nitriding, induction hardening, through-hardening or Q&T where appropriate to the design |
| 检查 | Tooth geometry, runout, bore/spline/journals and drawing datums as applicable |
| Supply basis | New design, drawing-to-print, sample-supported replacement or matched planetary set |
Check sun, planet and ring data together
A conventional planetary stage combines a central sun gear, one or more planet gears, an internal ring gear and a carrier. The tooth counts and mesh geometry constrain each other. For a replacement, measuring only the damaged sun gear can miss profile shift, backlash strategy or mating-gear wear.
When available, send the planet gear and ring gear drawings, gearbox assembly drawing, original tooth counts, center-distance information and any contact-pattern or backlash requirement. This is especially important for helical planetary stages.
Process planning follows geometry, material and required quality
Alloy-steel forgings or bar routes, controlled heat treatment and hard finishing can be considered for demanding duties. The final route should follow the approved drawing and inspection plan rather than a generic hardness target.
The manufacturing route can therefore differ even between two sun gears of the same module. Batch quantity also matters because it affects tooling, fixturing and which spline or internal-feature process is economical.
What to send for an accurate quotation
Send the drawing or a clear set of gear data, then add the operating information that is not visible on the drawing. A sample can support a replacement project, but it should not be used to guess an unknown heat treatment or quality grade.
| 几何学 | Module/DP, tooth count, pressure angle, spur/helical form, helix angle and hand where applicable |
|---|---|
| Interface | Bore, keyway, spline, shaft, journal, thread and locating faces |
| Material / heat treatment | Material grade, hardness or case requirement, surface treatment if specified |
| Quality / inspection | Gear-quality standard and grade, runout, profile/lead or special inspection requirements |
| 责任 | Torque, speed, duty cycle, reversals, lubrication and working temperature when relevant |
| Mating data | Planet/ring tooth counts or drawings, carrier/center-distance information |
| 商业的 | Quantity, target delivery, packaging and Incoterm |
