Przejdź do treści
ZAWSZE MOCPrecyzyjne koła zębate i zębatki
sprzedaż@sungears.top Poproś o wycenę
Produkty

Gear Racks, Pinions & Custom Precision Gears

Use the catalogue in two ways. If a drawing already defines the component, start with the closest product family and send the controlled dimensions. If the drive is still being selected, begin with the machine duty and let module, tooth form, finish and pinion geometry follow from the application.

Product families

Three product groups cover most enquiries.

The catalogue is intentionally organized by buyer task rather than by a long list of proprietary model codes. Gear racks cover linear motion. Pinions and pinion shafts complete the rack drive. Custom gears support gearboxes, indexing mechanisms and special machinery where the drawing owns the geometry.

Precyzyjne zębatki śrubowe

Precyzyjne zębatki śrubowe

Płynnie działające sekcje zębate do osi CNC, tnących i automatycznych.

Zobacz szczegóły
Precyzyjne proste zębatki

Precyzyjne proste zębatki

Zęby proste, długość, otwory i wykończenie zgodne z rysunkiem.

Zobacz szczegóły
Zębatki naziemne

Zębatki naziemne

Konfiguracje z zębami szlifowanymi w celu zapewnienia bardziej precyzyjnego ruchu i wymagań dotyczących pozycjonowania.

Zobacz szczegóły
Zębatki i wałki zębate

Zębatki i wałki zębate

Dopasowanie zębów, wałków i interfejsów po stronie przekładni do napędów zębatkowych.

Zobacz szczegóły
Przekładnie walcowe i śrubowe

Przekładnie walcowe i śrubowe

Koła zębate zewnętrzne na zamówienie, produkowane według rysunku, do mechanizmów przemysłowych.

Zobacz szczegóły
Przekładnie stożkowe i wewnętrzne

Przekładnie stożkowe i wewnętrzne

Elementy przekładni stożkowych i wewnętrznych do maszyn specjalnych wykonane na podstawie rysunków.

Zobacz szczegóły
Gear racks

Choose the tooth form and finishing route around the axis.

Straight and helical racks are available in drawing-based configurations, including milled, induction-hardened and ground-tooth routes where the specification requires them. Length, hole pattern, end machining and mounting datums are treated as part of the component, not as afterthoughts.

For long axes, quote the rack together with the intended pinion or at least provide the pinion tooth data. Joined sections, pitch transition, backlash and the mounting base affect how a rack performs after installation.

Browse precision gear racks

Precision straight and helical gear racks
Pinions and pinion shafts for rack drives
Mating components

Pinion geometry has to match the rack and the gearbox interface.

A rack is only half of the mesh. Bore, keyway, spline, shaft or flange geometry on the pinion should fit the real drive arrangement while module, pressure angle, helix angle and hand remain compatible with the rack.

Where positioning or high reversal duty matters, include the gearbox output, bearing arrangement and desired backlash in the enquiry. That information helps avoid a mechanically correct pinion that is awkward to integrate.

Browse pinions and rack-pinion parts

Niestandardowe koła zębate

Use the drawing as the technical contract.

Custom gears are quoted from tooth data, bores and hubs, material and heat treatment, inspection requirements and quantity. Spur, helical, bevel and internal gears often need different manufacturing routes, so one generic “gear tolerance” statement is not enough.

When a mating gear controls contact or backlash, send both gears together. For replacement work, include the old part drawing, measurements or photos only as identification support; final manufacturing dimensions should be confirmed before production.

Browse custom precision gears

Custom spur, helical, bevel and internal gears
Selection matrix

What to decide before choosing a product page

These are the variables that usually change the manufacturing route, price and suitability. Unknown values can stay open, but they should be identified as open rather than guessed.

Tooth system Metric module, diametral pitch or circular pitch; pressure angle and helix details where relevant.
Motion or duty Travel, speed, acceleration, load, reversal frequency and required positioning quality for rack-driven axes.
Material Drawing grade or a performance requirement that allows an equivalent material route to be proposed.
Heat treatment Through hardening, induction hardening, carburizing or other drawing-controlled treatment when required.
Finish and accuracy Milled, ground or another specified finishing route; include the applicable gear-quality or dimensional tolerances.
Machining interfaces Holes, countersinks, ends, bores, keyways, splines, shoulders, shafts and the datum scheme used for inspection.
Quantity Prototype quantity, first production batch and expected annual demand when available.
Full catalogue

Browse all current product entries

Each product page includes a responsive specification table, configuration guidance, integration notes and the RFQ information needed to quote the part. Values that depend on the drawing are stated as project-specific instead of being filled with assumed data.

Custom machined gear rack mounting holes and tooth section
Custom-to-drawing work

Standard teeth can still sit on a highly customized component.

Many OEM racks use a familiar tooth system but require non-standard cross-sections, mounting-hole locations, end preparation or inspection datums. Those details should remain on the drawing and stay visible during quotation, manufacturing and inspection.

If the design is still open, send the machine envelope and the functional requirement. If the design is frozen, send the latest revision of the drawing and clearly identify which dimensions or notes are critical.

Prepare an RFQ

Masz rysunek lub dane aplikacyjne?

Wyślij szczegóły definiujące część.

A useful quotation starts with the geometry and the operating context. Send the drawing, quantity and controlled requirements; for rack-driven axes, add travel, speed, acceleration, load and the mating pinion or gearbox information when available.

Zamawianie: Minimalne zamówienie (MOQ) jest elastyczne w zależności od rodzaju produktu i wartości zamówienia. Odpowiednie próbki dla nowych klientów mogą obejmować 1–5 sztuk; zamówienia mieszane są obsługiwane przy łącznej wartości około 1500 USD lub więcej, natomiast 1–2 sztuki można rozważyć po wyższej cenie jednostkowej.

Terminy i warunki: Standardowe części dostarczane są zazwyczaj w ciągu 10–25 dni roboczych, komponenty niestandardowe w ciągu 20–45 dni roboczych, a sprzęt projektowy w ciągu 45–120 dni roboczych. Standardowo dostępne są dostawy EXW, FOB, CIF i DAP; FCA, CFR, CPT, CIP i DDP mogą być negocjowane indywidualnie.

Wyślij zapytanie ofertowe