Перейти к содержимому
ВЕЧНАЯ СИЛАПрецизионные шестерни и зубчатые рейки
[email protected] Запросить ценовое предложение
Продукты

Gear Racks, Pinions & Custom Precision Gears

Use the catalogue in two ways. If a drawing already defines the component, start with the closest product family and send the controlled dimensions. If the drive is still being selected, begin with the machine duty and let module, tooth form, finish and pinion geometry follow from the application.

Product families

Three product groups cover most enquiries.

The catalogue is intentionally organized by buyer task rather than by a long list of proprietary model codes. Gear racks cover linear motion. Pinions and pinion shafts complete the rack drive. Custom gears support gearboxes, indexing mechanisms and special machinery where the drawing owns the geometry.

Прецизионные зубчатые рейки с косозубыми шестернями

Прецизионные зубчатые рейки с косозубыми шестернями

Секции зубчатых реек с плавным ходом для осей станков с ЧПУ, режущих и автоматизированных систем.

Просмотреть подробности
Прецизионные зубчатые рейки

Прецизионные зубчатые рейки

Реечные рейки с прямыми зубьями, длиной, отверстиями и отделкой, заданными на чертеже.

Просмотреть подробности
Стойки наземного оборудования

Стойки наземного оборудования

Шлифованная конфигурация зубьев для более жестких требований к перемещению и позиционированию.

Просмотреть подробности
Шестерни и валы шестерен

Шестерни и валы шестерен

Сопрягаемые шестерни, валы и интерфейсы со стороны редуктора для реечных приводов.

Просмотреть подробности
Цилиндрические и косозубые шестерни

Цилиндрические и косозубые шестерни

Изготовление на заказ внешних зубчатых передач по чертежам для промышленных механизмов.

Просмотреть подробности
Конические и внутренние зубчатые передачи

Конические и внутренние зубчатые передачи

Конические и внутренние зубчатые передачи, изготовленные по чертежам, для специального оборудования.

Просмотреть подробности
Gear racks

Choose the tooth form and finishing route around the axis.

Straight and helical racks are available in drawing-based configurations, including milled, induction-hardened and ground-tooth routes where the specification requires them. Length, hole pattern, end machining and mounting datums are treated as part of the component, not as afterthoughts.

For long axes, quote the rack together with the intended pinion or at least provide the pinion tooth data. Joined sections, pitch transition, backlash and the mounting base affect how a rack performs after installation.

Browse precision gear racks

Precision straight and helical gear racks
Pinions and pinion shafts for rack drives
Mating components

Pinion geometry has to match the rack and the gearbox interface.

A rack is only half of the mesh. Bore, keyway, spline, shaft or flange geometry on the pinion should fit the real drive arrangement while module, pressure angle, helix angle and hand remain compatible with the rack.

Where positioning or high reversal duty matters, include the gearbox output, bearing arrangement and desired backlash in the enquiry. That information helps avoid a mechanically correct pinion that is awkward to integrate.

Browse pinions and rack-pinion parts

Нестандартные шестерни

Use the drawing as the technical contract.

Custom gears are quoted from tooth data, bores and hubs, material and heat treatment, inspection requirements and quantity. Spur, helical, bevel and internal gears often need different manufacturing routes, so one generic “gear tolerance” statement is not enough.

When a mating gear controls contact or backlash, send both gears together. For replacement work, include the old part drawing, measurements or photos only as identification support; final manufacturing dimensions should be confirmed before production.

Browse custom precision gears

Custom spur, helical, bevel and internal gears
Selection matrix

What to decide before choosing a product page

These are the variables that usually change the manufacturing route, price and suitability. Unknown values can stay open, but they should be identified as open rather than guessed.

Tooth system Metric module, diametral pitch or circular pitch; pressure angle and helix details where relevant.
Motion or duty Travel, speed, acceleration, load, reversal frequency and required positioning quality for rack-driven axes.
Material Drawing grade or a performance requirement that allows an equivalent material route to be proposed.
Heat treatment Through hardening, induction hardening, carburizing or other drawing-controlled treatment when required.
Finish and accuracy Milled, ground or another specified finishing route; include the applicable gear-quality or dimensional tolerances.
Machining interfaces Holes, countersinks, ends, bores, keyways, splines, shoulders, shafts and the datum scheme used for inspection.
Quantity Prototype quantity, first production batch and expected annual demand when available.
Full catalogue

Browse all current product entries

Each product page includes a responsive specification table, configuration guidance, integration notes and the RFQ information needed to quote the part. Values that depend on the drawing are stated as project-specific instead of being filled with assumed data.

Custom machined gear rack mounting holes and tooth section
Custom-to-drawing work

Standard teeth can still sit on a highly customized component.

Many OEM racks use a familiar tooth system but require non-standard cross-sections, mounting-hole locations, end preparation or inspection datums. Those details should remain on the drawing and stay visible during quotation, manufacturing and inspection.

If the design is still open, send the machine envelope and the functional requirement. If the design is frozen, send the latest revision of the drawing and clearly identify which dimensions or notes are critical.

Prepare an RFQ

У вас есть чертеж или данные для применения?

Пришлите подробную информацию, описывающую деталь.

A useful quotation starts with the geometry and the operating context. Send the drawing, quantity and controlled requirements; for rack-driven axes, add travel, speed, acceleration, load and the mating pinion or gearbox information when available.

Заказ: Минимальный объем заказа (MOQ) является гибким и зависит от типа продукции и стоимости заказа. Для новых клиентов подходит заказ от 1 до 5 образцов; заказы на смешанные модели принимаются на сумму около 1500 долларов США и более, а заказы на 1-2 единицы могут быть рассмотрены по более высокой цене за единицу.

Сроки и условия: Сроки поставки стандартных деталей обычно составляют 10-25 рабочих дней, компонентов, изготовленных на заказ, — 20-45 дней, а проектного оборудования — 45-120 дней. Доступны условия поставки EXW, FOB, CIF и DAP; условия FCA, CFR, CPT, CIP и DDP могут обсуждаться в каждом конкретном случае.

Отправить запрос на коммерческое предложение