Опис
Шестерня циліндра
Straight-tooth pinions for rack-and-pinion drives, indexing mechanisms and custom machinery.
Where this component fits
Straight-tooth pinions for rack drives, indexing mechanisms and custom machinery using a spur mesh.
Automation gantries, material handling, lifting/positioning and straight-rack machine axes are common contexts.
Technical specifications
The values below are the current catalogue and drawing-based scope already associated with this product family. Where a value is described as project-specific or “confirm drawing,” the released drawing remains the final technical reference.
| Tooth form | Straight / spur |
|---|---|
| Module / DP / CP | Match mating rack or gear |
| Pressure angle | Per drawing |
| Bore/interface | Custom bore, keyway, shaft or hub |
| Термічна обробка | Per load and drawing |
Selection should follow the mating component and the real duty
The pinion must match the rack module/pitch and pressure angle. Tooth count and pitch diameter influence speed, feed force and gearbox ratio selection at the system level.
If a requested parameter is not yet fixed, provide the functional target and allow it to remain an open selection item. That is safer than locking the project to an assumed value that has not been checked against the mating component or machine.
Details that change the quotation
These fields help separate a standardizable configuration from a part that needs drawing-specific machining or inspection.
| Tooth data | Tooth count, module/DP, pressure angle and helix/shaft-angle data where applicable. |
|---|---|
| Mating component | Send the rack or mating gear data when mesh/contact/backlash depends on the pair. |
| Interfaces | Bore, keyway, spline, hub, shaft, flange and bearing/shoulder details. |
| Material/treatment | Drawing material, heat treatment, hardness and finish when controlled. |
| Accuracy | Gear-quality/tolerance and runout/concentricity requirements tied to functional datums. |
| Quantity | Prototype, production batch and annual demand if available. |
Process route follows the ordered specification
Manufacturing route depends on gear type, material, heat treatment and required tooth quality. Blank and datum machining, tooth cutting, heat treatment, finishing, bore/shaft features and final inspection should be planned as one sequence so later operations do not compromise the controlled geometry.
Material substitutions, heat-treatment changes and tolerance relaxations should be approved before production. For repeat orders, the approved drawing revision and any agreed inspection scope should remain attached to the order.
Fit, mounting and mating-part considerations
Bore, keyway, spline or shaft details should be designed around the gearbox/shaft rather than added after the tooth geometry is fixed.
For replacement work, send the existing part or assembly information as identification support, but confirm the production dimensions before release. Visual similarity is not a substitute for the tooth and interface data.
Inspection should follow the functional datums
Inspection commonly includes tooth data, bore/shaft features, runout and the relation between gear teeth and the mounting datum.
If dimensional reports, material certificates or heat-treatment records are required with the order, identify them in the RFQ so they are included in the quality plan rather than requested after production is complete.
Products commonly reviewed together
Related components are shown as practical design companions, not as claims that every item is automatically compatible. Match the actual drawing and mating tooth data before ordering.
What to send for a useful quotation
Attach the latest drawing and state quantity, material, treatment, tooth data and critical inspection requirements. For rack-driven motion, add the axis duty and the mating pinion/gearbox details where available. STEP or DWG files help when secondary machining and interfaces are complex.
Надішліть деталі, що визначають деталь.
Корисна цінова пропозиція починається з геометрії та робочого контексту. Надішліть креслення, кількість та контрольовані вимоги; для осей з рейковим приводом додайте інформацію про хід, швидкість, прискорення, навантаження та відповідність шестерні або коробці передач, якщо такі є.
Замовлення: Мінімальна кількість замовлення (MOQ) залежить від типу продукту та вартості замовлення. Підходящі зразки для нових клієнтів можуть становити від 1 до 5 шт.; змішані замовлення підтримуються на суму від 1500 доларів США та більше, тоді як 1-2 шт. можна розглядати за вищою ціною за одиницю.
Timing & terms: Стандартні деталі зазвичай постачаються протягом 10-25 робочих днів, компоненти на замовлення — 20-45, а проектне обладнання — 45-120. Зазвичай доступні угоди EXW, FOB, CIF та DAP; умови FCA, CFR, CPT, CIP та DDP можна обговорити в кожному конкретному випадку.
